Aarhus Universitets segl

DIRAC – A Danish CERN Lighthouse Initiative 

Work Packages

The scientific activities in DIRAC are organised into six work packages (WPs). 

A key element of the programme is the establishment of PhD projects with joint contributions to supervision from the participating institutions.

WP1: Capacity Building in Calorimetry

Lead: University of Copenhagen (Niels Bohr Institute) and Aarhus University

Aim: To build and strengthen Danish technical capacity for the design, construction, and testing of advanced calorimeters, with a focus on ALICE Forward Calorimeter (FoCal) and a long-term goal of a leading role in the development of the luminosity calorimeter, LumiCal, for the Future Circular Collider (FCC)

Key activities:

  • Construction, assembly, and testing of detector modules for ALICE FoCal-E
  • High-precision mechanical design, including machining of tungsten plates, in collaboration with industry
  • Design and prototyping of a calorimeter for the High-Luminosity Large Hadron Collider (HL-LHC) with tests at CERN planned for 2029–2030
  • Design studies to optimise LumiCal for FCC
  • Evaluation of full-wafer silicon sensor technologies in collaboration with DTU Nanolab
  • Addressing key design challenges such as mechanical stability, sensor placement, compact electronics, cooling, and in-situ monitoring

WP2: Future Detector Concepts and Semiconductor Technologies

Lead: DTU Nanolab and Aarhus University (Physics and Astronomy)

Aim: To develop next-generation scintillator-based calorimeters and radiation-hard semiconductor detectors for future high-energy physics facilities and experiments such as the FCC

Key activities:

  • Development and characterisation of novel scintillator materials
  • Optimisation of light collection geometries
  • Integration of advanced Silicon Photomultiplier (SiPM) detectors, with a focus on new technologies such as Metal-Trench SiPMs (MT-SiPMs) with enhanced operating range
  • Testing in high-rate environments
  • Engagement with CERN's Crystal Clear Collaboration (RD-18) on material physics and detector development
  • Studies of the influence of radiation on wide-bandgap semiconductor materials, such as silicon carbide (SiC), gallium nitride (GaN), and diamond, including the development of test setups
  • Characterisation of radiation-induced degradation mechanisms
  • Modelling of charge trapping effects and material defects
  • Development of design guidelines for radiation-hard detector electronics

WP3: Quantum Technologies and Advanced Materials

Lead: Danish National Metrology Institute

Aim: To contribute to CERN’s quantum technology initiatives by developing and delivering high-quality materials and devices

Key activities:

  • Fabrication and characterisation of superconducting qubits and resonators
  • Development of quantum sensors and SQUID-based systems
  • Development and testing of a microwave Fabry–Pérot cavity
  • Exploration of the interplay between quantum materials and CERN’s experimental needs

WP4: Chips, Electronics and Radical Miniaturisation

Lead: Aarhus University (Electrical and Computer Engineering)

Aim: To develop accelerator-on-a-chip concepts based on integrated photonics for future accelerator and detector systems

Key activities:

  • Design and simulation of photonic accelerator structures
  • Fabrication of prototype devices in cleanroom facilities
  • Radiation-hardness and stability testing
  • Testing at CERN

WP5: Green Technology and Life Cycle Assessment (LCA)

Lead: Aalborg University

Aim: To integrate sustainability assessments into the development of new technologies at CERN

Key activities:

  • Life Cycle Assessment (LCA) of CERN infrastructure and AI technologies
  • Systematic mapping of CERN’s energy and resource flows and development of recommendations for greener solutions for FCC

WP6: Establishment of Strategic Collaboration Frameworks

Lead: Danish Technological Institute

Aim: To establish formal R&D collaboration frameworks between CERN and Danish research institutions

Key activities:

  • Systematic mapping of CERN’s technological needs
  • Development of a “best practice” guide based on international experience
  • Identification of Danish research groups within relevant technical fields
  • Facilitation of matchmaking activities, workshops, and meetings between CERN and Danish partners
  • Evaluation and formulation of recommendations for future collaborations